5 Steps for Determining Your Tow Vehicle’s Correct Load Limit


Folded tow truck in North Carolina (Photo by Ildar Sagdejev, courtesy of Wikimedia Commons)


What happens if you use your vehicle to tow a load heavier than it can handle? Nothing good. If you like your vehicle and want to continue using it, it’s a good idea to make sure you are not overloading it or attaching it to a tow load that is too much for it. There are some basic steps you can follow to figure out whether or not your vehicle can handle a particular load.

Here are 5 steps for determining your tow vehicle’s correct load limit.

Step 1 – Learn What the Manufacturer Says


Your vehicle may be equipped with a placard that describes your vehicle’s load limit, or you may find it in the owner’s manual. In either case, locate the statement that says: “The combined weight of occupants and cargo should never exceed XXX lbs.”

Step 2 – Figure out the Weight of the People in the Vehicle


The people inside of the vehicle will contribute to the total weight your vehicle is being asked to carry. Determine the combined weight of the driver and all passengers who will be riding in your vehicle.

Step 3 – Adjust Your Cargo Capacity


Subtract the combined weight of the people in the vehicle from the manufacturer’s recommended cargo capacity. The resulting figure equals the available amount of cargo and luggage capacity.  For example, if the recommended weight limit equals 3000 lbs. and there will be five 150 lb. passengers in the vehicle, the amount of available cargo and luggage capacity is 2250 lbs. (3000 – (5 x 150) = 2250).

Step 4 – Calculate Your Cargo Weight


Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage capacity calculated in the previous step.

Step 5 – Don’t Forget the Transfer Weight from Your Trailer


If you are going to be pulling a trailer, a certain portion of the weight of your trailer and its load will be transferred to the tongue of your vehicle. This weight must also be included in your load weight calculations. Consult your tow vehicle’s manual to determine how this weight transfer reduces the available cargo and luggage capacity of your vehicle.

 

So, the total load on your vehicle includes the weight of the driver and all passengers + the weight of all luggage or cargo + the tongue weight transferred from your trailer and its load. You must make sure all of these things combined do not exceed the maximum rated weight capacity of your vehicle.

 

This article was provided by U-Dump Trailers, LLC. For more information, visit U-Dump at: https://udumptrailers.com